SHOEI
SHOEI
Sort by
Show result
  • Created Exclusively For The Shoei Neotec Ii
  • Communication Is Our Game
  • A Feature Set To Keep You Moving In The Right Direction
  • Versatile Connectivity Makes For Versatile Capabilities

GENERAL

  • Talk time: 10 hours
  • Operating temperature: -10˚C ~ 55˚C (14°F ~ 131°F)
  • Dimensions:
  • Speaker: driver unit unit 31.9 mm – thickness 4.4 mm
  • Boom microphone: length 55 mm
  • Wire between speakers: length 85 mm
  • Weight: main module - 100 g (3.53 oz)

 

BLUETOOTH

  • Bluetooth 4.1
  • Headset Profile (HSP)
  • Hands-Free Profile (HFP)
  • Advanced Audio Distribution Profile (A2DP)
  • Audio Video Remote Control Profile (AVRCP)

 

INTERCOM

  • Working Distance: Up to 1.6 kilometers (1.0 mile) in open terrain
  • Supports up to 8 riders

 

AUDIO

  • Noise Cancellation: Advanced Noise Control™
  • Codec: Built-in SBC Codec

 

FM RADIO

  • Radio frequency specifications: 76 ~ 108MHz
  • 10 preset station memory

 

BATTERY

  • Charging time: 2.5 hours
  • Type: Lithium Polymer Battery

 

CERTIFICATES

  • CE, FCC, IC
RM1,350.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head

 

RM2,100.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head

 

RM2,100.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head
  •  

 

RM2,100.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head
  •  

 

RM2,100.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head
  •  

 

RM1,430.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head
  •  

 

RM1,430.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head
  •  

 

RM1,430.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head
  •  

 

RM1,750.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head
  •  

 

RM1,750.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head
  •  

 

RM1,750.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head
  •  

 

RM1,750.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head
  •  

 

RM1,435.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head
  •  

 

RM3,000.00

WARRANTY

  • International Manufacture 5 YEAR WARRANTY

DESIGN CONCEPT

  • Wind tunnel-tested and refined aerodynamics
  • Shell-integrated spoiler reduces lift and drag
  • Noise-reduction technology reduces unwanted wind and road noises
  • Convenient flip-down internal sun shield
  • Adapts to the ever-changing conditions that lie ahead

VENTILATION PERFORMANCE

  • Large upper and lower vent shutters for ease of use with riding gloves
  • Strategically-placed, three position upper vent for optimal air intake
  • Three (3) intake and three (3) exhaust vents
  • Wind tunnel-optimized to maximize airflow and improve negative air pressure exhaust suction

CNS-1 SHIELD

  • Large field of vision protects from 99% of the sun’s damaging UV rays
  • 3D injection-molding ensures a distortion-free view throughout entire field of vision
  • Comes equipped with Pinlock® EVO fog-resistant system

QR-N BASE PLATE SYSTEM

  • Smooth and easy shield changes
  • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal

INTERNAL SUN SHIELD

  • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
  • Large, easily located switch activates the 3D injection-molded inner shield
  • Distortion-free view blocks 99% of the sun’s damaging UV rays
  • Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
  • Exceeds ANSI Z80.3-2010 standard for non-prescription eyewear

MULTI-PLY MATRIX AIM SHELL

  • Proprietary technology integrates a five-ply matrix
  • Hand-laid interwoven layers of fiberglass with organic fibers and resin
  • Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight

MULTI-PIECE EPS LINER

  • Provides enhanced impact absorption by utilizing varying densities of foam
  • Designed to allow cooling air to travel unrestricted through tunnels created in the EPS

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)

  • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
  • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

3D MAX-DRY INTERIOR SYSTEM

  • Fully removable, washable, replaceable, and adjustable
  • Max-dry liner material absorbs and dissipates sweat twice as fast as traditional nylon interiors
  • Multi-layer cheek pads for comfort and helmet stabilization
  • Three-dimensionally shaped to match the contours of a rider’s head
  •  

 

RM3,000.00